STM32F730R8 datasheet(21/202 Pages) STMICROELECTRONICS

21 / 202 page

DS12536 Rev 2

21/202

STM32F730x8

Functional overview

3.1

Arm® Cortex®-M7 with FPU

The Arm® Cortex®-M7 with FPU processor is the latest generation of Arm processors for

embedded systems. It was developed to provide a low-cost platform that meets the needs of

MCU implementation, with a reduced pin count and low-power consumption, while

delivering outstanding computational performance and low interrupt latency.

The Cortex®-M7 processor is a highly efficient high-performance featuring:

–

Six-stage dual-issue pipeline

–

Dynamic branch prediction

–

Harvard caches (8 Kbytes of I-cache and 8 Kbytes of D-cache)

–

64-bit AXI4 interface

–

64-bit ITCM interface

–

2x32-bit DTCM interfaces

The processor supports the following memory interfaces:

•

Tightly Coupled Memory (TCM) interface.

•

Harvard instruction and data caches and AXI master (AXIM) interface.

•

Dedicated low-latency AHB-Lite peripheral (AHBP) interface.

The processor supports a set of DSP instructions which allow efficient signal processing and

complex algorithm execution.

It supports single precision FPU (floating point unit), speeds up software development by

using metalanguage development tools, while avoiding saturation.

Figure 4 shows the general block diagram of the STM32F730x8 family.

Note:

Cortex®-M7 with FPU core is binary compatible with the Cortex®-M4 core.

3.2

Memory protection unit

The memory protection unit (MPU) is used to manage the CPU accesses to memory to

prevent one task to accidentally corrupt the memory or resources used by any other active

task. This memory area is organized into up to 8 protected areas that can in turn be divided

up into 8 subareas. The protection area sizes are between 32 bytes and the whole 4

gigabytes of addressable memory.

The MPU is especially helpful for applications where some critical or certified code has to be

protected against the misbehavior of other tasks. It is usually managed by an RTOS (real-

time operating system). If a program accesses a memory location that is prohibited by the

MPU, the RTOS can detect it and take action. In an RTOS environment, the kernel can

dynamically update the MPU area setting, based on the process to be executed.

The MPU is optional and can be bypassed for applications that do not need it.

STM32F730R8 Datasheet(PDF) 21 Page - STMicroelectronics

STM32F730R8 Datasheet(HTML) 21 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Descarga

Enlace URL