Package information

FDA802B

10/12

DocID030735 Rev 2

3.2

LQFP64 (10x10x1.4 mm exp. pad up) marking information

Figure 4. LQFP64 (10x10x1.4 mm exp. pad up) marking information

Parts marked as ‘ES’ are not yet qualified and therefore not approved for use in production.

ST is not responsible for any consequences resulting from such use. In no event will ST be

liable for the customer using any of these engineering samples in production. ST’s Quality

department must be contacted to run a qualification activity prior to any decision to use

these engineering samples.