Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or

reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its

documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or

implied. Bridgetek Pte Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product.

Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or

system in which the failure of the product might reasonably be expected to result in personal injury. This document provides

preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property

rights is implied by the publication of this document. Bridgetek Pte Ltd, 178 Paya Lebar Road, #07-03, Singapore 409030.

Singapore Registered Company Number: 201542387H

Copyright © Bridgetek Pte Ltd

1

MM930Lite Datasheet

Version 1.0

Document Reference No.: BRT_000085

Clearance No.: BRT#069

Bridgetek Pte Ltd

Datasheet

MM930Lite Development

Module

FT93x Family is a General Purpose 32-bit Microcontroller

1

Introduction

The MM930Lite is a development module for

Bridgetek’s

32-bit

high

performance

FT93x

Microcontroller family, which is used to develop

and demonstrate the functionality of the FT930

Embedded Microcontroller.

This module is ideal for applications including

home

security

systems,

home

automation

systems, USB capability products, embedded

multimedia

application

and

other

industrial

control systems.

1.1

Features

For a full list of the FT93x features refer to the

FT93x datasheet.

In addition, the MM930Lite module has the

following features:



FT930Q 68-pin QFN package microcontroller.



Micro SD card socket support.



In built 8M Byte Eflash memory.



A Micro-B USB for connecting to a USB host or

providing a power supply over USB for the

board.



2x8 pins 2.54mm pitch dual entry female

header and 16 pins 0.5mm pitch FFC/FPC

connectors for SPI master to support LCD

display modules.



2x5 pins 1.27mm pitch female Micro-MaTch

connector for software download.



2x20 pins 2.54mm pitch female header

support for external feature expansions.



+5V alternative power supply DC connector.



Hardware Reset button provided.