IRMCS2033

This document is the property of International Rectifier and may not be copied or distributed without expressed consent.

13

Command Acknowledgement Byte

Checksum

Register Read Acknowledgement (error)

The following example shows a command sequence sent from the host to the IRMCK203 requesting four bytes of read

register data:

0xA0

Read operation beginning at offset 0x20 (high-order bit selects read operation)

0x04

Requested data byte count is 4

0xA4

Checksum

A good reply from the IRMCK203 might appear as follows:

0x20

Read completed OK at offset 0x20

0x11

Data byte 1

0x22

Data byte 2

0x33

Data byte 3

0x44

Data byte 4

0xCA

Checksum

An error reply to the command would have the following format:

0xA0

Read at offset 0x20 completed in error

0xA0

Checksum

RS-232 Timeout

The IRMCK203 receiver includes a timer that automatically terminates transfers from the host to the IRMCK203 after

a period of 32 msec.

RS-232 Transfer Examples

The following example shows a normal exchange executing a register write access.

The example below shows a normal register read access exchange.