4

PI5V330A

Low On-Resistance Wideband/Video

Quad 2-Channel Mux/DeMux

PS8695B

03/01/05

Definitions

Symbol

Description

Resistance between source and drain with switch in the ON state.

Output leakage current measured at S1, S2, and D with the switch OFF.

Digital voltage at the IN pin that selects between S1 and S2 analog inputs.

A voltage that ENABLES the chip.

Capacitance at the digital inputs.

Capacitance at analog I/O (S1, S2, D) with switch OFF.

Capacitance at analog I/O (S1, S2, D) with switch ON.

Minimum input voltage for logic HIGH.

Minimum input voltage for logic LOW.

Input current of the digital input.

Minimum short circuit current for S1, S2 and D.

Propagation delay measured between 50% of the digital input to 90% of the analog output when switch is turned

ON. The peak analog voltage is 0.714V.

Propagation delay measured between 50% of the digital input to 90% of the analog output when switch is turned

OFF. The peak analog voltage is 0.714V.

Frequency response of the switch in the ON state measured at 3dB down.

non-adjacent crosstalk.

Differential gain is the difference measurement between two bias levels, for instance analog input signals of 0V

to 0.714V.

Differential phase is the difference measurement between two bias levels, for instance analog input signals of 0V

to 0.714V.

Off isolation is the resistance (measured in –dB) between the input and output with the switch off (NO).