PTRA094808NF

9

Rev. 05.2, 2022-01-04

© 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc.

The information in this document is subject to change without notice.

4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300

Package Outline Specifications – Package PG-HBSOF-6-2 (bottom view)

2x 0.50

0.05

23.26

24.40

2

2

Diagram Notes—unless otherwise specified:

1. Mold/dam bar/metal protrusion of 0.30 mm max per side not included.

2. Metal protrusions are connected to source and shall not exceed 0.10 mm max.

3. Fillets and radii: all radii are 0.3 mm max.

4. Interpret dimensions and tolerances per ISO 8015.

5. Dimensions are mm.

6. Does not include mold/dam bar and metal protrusion.

7. Exposed metal surface is tin-plated, may not be covered by mold compound.

8. All tolerances ± 0.1 mm unless specified otherwise.

9. All metal surfaces are tin-plated, except area of cut.

10. Lead thickness: 0.25 mm.

11. Pins: D1, D2 = drain; G1, G2 = gate; S = source, V1, V2 = no DC bias, NC or

connect to GRD

V2

V1

PG-HBSOF-6-2_02.1_01-17-2017

D2

D1

G2

G1

11. Pins: D1, D2 = drain; G1, G2 = gate; S = source; V1 = drain video

decoupling, no DC Bias, V2 = NC or connected to GRD