PTRA095908NB

8

Rev. 02.2, 2022-02-13

© 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc.

The information in this document is subject to change without notice.

4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300

32.26

2x 14.12

2x 10.6

2x 1.02

2.83

7.06

4x 11.29

2x 4.44

1.57

1

0.25

3.81

32.26

5

2x 1.00

10°

7°

2x 0.50

0.05

31.26

D1

D2

G1

G2

D2

D1

G2

G1

V

V

V

V

PG-HB2SOF-6-1_prelim_02-09-2017

PG-HB2SOF-6-1_prelim_02-09-2017

Diagram Notes—unless otherwise specified:

1. Mold/dam bar/metal protrusion of 0.30 mm max per side not included.

2. Fillets and radii: all radii are 0.3 mm max.

3. Interpret dimensions and tolerances per ISO 8015.

4. Dimensions are mm.

5. Does not include mold/dam bar and metal protrusion.

6. All tolerances ± 0.1 mm unless specified otherwise.

7. All metal surfaces tin pre-plated, except area of cut.

8. Lead thickness: 0.25 mm.

9. Pins: D1, D2 – drain; G1, G2 – gate; S – source;

V – drain video decoupling, no DC bias

Diagram Notes—unless otherwise specified:

1. Mold/dam bar/metal protrusion of 0.30 mm max per side not included.

2. Fillets and radii: all radii are 0.3 mm max.

3. Interpret dimensions and tolerances per ISO 8015.

4. Dimensions are mm.

5. Does not include mold/dam bar and metal protrusion.

6. All tolerances ± 0.1 mm unless specified otherwise.

7. All metal surfaces tin pre-plated, except area of cut.

8. Lead thickness: 0.25 mm.

9. Pins: D1, D2 – drain; G1, G2 – gate; S – source;

V – drain video decoupling, no DC bias

32.26

2x 14.12

2x 10.6

2x 1.02

2.83

7.06

4x 11.29

2x 4.44

1.57

1

0.25

3.81

32.26

5

2x 1.00

10°

7°

2x 0.50

0.05

31.26

D1

D2

G1

G2

D2

D1

G2

G1

V

V

V

V

PG-HB2SOF-6-1_prelim_02-09-2017

PG-HB2SOF-6-1_prelim_02-09-2017

Top and Side View

Bottom View

Package Outline Specifications – Package PG-HB2SOF-6-1