AM29F017D datasheet(25/41 Pages) AMD

25 / 41 page

September 12, 2006 21195E5

Am29F017D

DA TA

SH EET

ABSOLUTE MAXIMUM RATINGS

Storage Temperature

Plastic Packages . . . . . . . . . . . . . . . –65

°C to +125°C

Ambient Temperature

with Power Applied. . . . . . . . . . . . . . –55

°C to +125°C

Voltage with Respect to Ground

VCC (Note 1) . . . . . . . . . . . . . . . . . –2.0 V to 7.0 V

A9, OE#, RESET# (Note 2) . . . . . –2.0 V to 12.5 V

All other pins (Note 1) . . . . . . . . . . –2.0 V to 7.0 V

Output Short Circuit Current (Note 3) . . . . . . 200 mA

Notes:

1. Minimum DC voltage on input or I/O pins is –0.5 V. During

voltage transitions, inputs may overshoot VSS to –2.0 V

for periods of up to 20 ns. See Figure 6. Maximum DC

voltage on output and I/O pins is VCC + 0.5 V. During

voltage transitions, outputs may overshoot to VCC + 2.0 V

for periods up to 20 ns. See Figure 7.

2. Minimum DC input voltage on A9, OE#, RESET# pins is

–0.5V. During voltage transitions, A9, OE#, RESET# pins

may overshoot VSS to –2.0 V for periods of up to 20 ns.

See Figure 6. Maximum DC input voltage on A9, OE#,

and RESET# is 12.5 V which may overshoot to 13.5 V for

periods up to 20 ns.

3. No more than one output shorted at a time. Duration of

the short circuit should not be greater than one second.

Stresses greater than those listed in this section may cause

permanent damage to the device. This is a stress rating

only; functional operation of the device at these or any other

conditions above those indicated in the operational sections

of this specification is not implied. Exposure of the device to

absolute maximum rating conditions for extended periods

may affect device reliability.

OPERATING RANGES

Commercial (C) Devices

Ambient Temperature (TC) . . . . . . . . . . . 0°C to +70°C

Industrial (I) Devices

Ambient Temperature (TC) . . . . . . . . . –40°C to +85°C

Extended (E) Devices

Ambient Temperature (TA) . . . . . . . . –55°C to +125°C

VCC Supply Voltages

VCC for ± 10% all devices . . . . . . . . .+4.5 V to +5.5 V

Operating ranges define those limits between which the

functionality of the device is guaranteed.

20 ns

VCC

+2.0 V

VCC

+0.5 V

20 ns

2.0 V

Figure 6.

Maximum Negative

Overshoot Waveform

20 ns

+0.8 V

–0.5 V

20 ns

–2.0 V

Figure 7.

Maximum Positive

Overshoot Waveform

AM29F017D Datasheet(PDF) 25 Page - Advanced Micro Devices

AM29F017D Datasheet(HTML) 25 Page - Advanced Micro Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41

Datasheet Descarga

Enlace URL