IRLR3705ZPBF datasheet(11/11 Pages) IRF

11 / 11 page

IRLR/U3705ZPbF

www.irf.com

Data and specifications subject to change without notice.

This product has been designed for the Automotive [Q101] market.

Qualification Standards can be found on IR’s Web site.

IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105

TAC Fax: (310) 252-7903

Visit us at www.irf.com for sales contact information.12/04

Repetitive rating; pulse width limited by

max. junction temperature. (See fig. 11).

Limited by TJmax, starting TJ = 25°C, L = 0.12mH

RG = 25Ω, IAS = 42A, VGS =10V. Part not

recommended for use above this value.

Pulse width ≤ 1.0ms; duty cycle ≤ 2%.

Notes:

Coss eff. is a fixed capacitance that gives the same charging time

as Coss while VDS is rising from 0 to 80% VDSS .

Limited by TJmax , see Fig.12a, 12b, 15, 16 for typical repetitive

avalanche performance.

This value determined from sample failure population. 100%

tested to this value in production.

When mounted on 1" square PCB (FR-4 or G-10 Material) .

For recommended footprint and soldering techniques refer to

application note #AN-994

Rθ is measured at TJ approximately 90°C

D-Pak (TO-252AA) Tape & Reel Information

Dimensions are shown in millimeters

16.3 ( .641 )

15.7 ( .619 )

8.1 ( .318 )

7.9 ( .312 )

12.1 ( .476 )

11.9 ( .469 )

FEED DIRECTION

16.3 ( .641 )

15.7 ( .619 )

TRR

TRL

NOTES :

1. CONTROLLING DIMENSION : MILLIMETER.

2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS ( INCHES ).

3. OUTLINE CONFORMS TO EIA-481 & EIA-541.

NOTES :

1. OUTLINE CONFORMS TO EIA-481.

16 mm

13 INCH

IRLR3705ZPBF Datasheet(PDF) 11 Page - International Rectifier

IRLR3705ZPBF Datasheet(HTML) 11 Page - International Rectifier

Html Pages

1 2 3 4 5 6 7 8 9 10 11

Datasheet Descarga

Enlace URL