INTRODUCTION:

PROTO-SHIELD

is prototype board compatible with all of Olimex's AR-

DUINO compatible boards – like OLIMEXINO-328, OLIMEXINO-STM32 and

PIC32-PINGUINO. The board comes without mounted connectors on it, but it is

shipped with one 6x1 connector and three 8x1 connectors, which can be mounted

by the customer. The prototype area gives user the opportunity to solder different

extensions for ARDUINO compatible boards. All this allows you to build a di-

versity of applications.

BOARD FEATURES:

•

one 6x1 connector – not mounted

•

three 8x1 connectors – not mounted

•

two status leds

•

two user buttons

•

prototype area

•

FR-4, 1.5 mm, soldermask, component print

•

Dimensions: 68.58 x 53.34mm (2.71 x 2.11")

ELECTROSTATIC WARNING:

The PROTO-SHIELD board is shipped in protective anti-static packaging. The

board must not be subject to high electrostatic potentials. General practice for

working with static sensitive devices should be applied when working with this

board.

BOARD USE REQUIREMENTS:

Hardware:

The board can be used with any of our ARDUINO compatible

boards: OLIMEXINO-328, OLIMEXINO-STM32, PIC32-PINGUINO, PIC32-

PINGUINO-OTG.

Page 2