MAT12

Data Sheet

Rev. A | Page 4 of 12

ABSOLUTE MAXIMUM RATINGS

Table 2.

Parameter

Rating

Breakdown Voltage of

Collector-to-Base Voltage (BVCBO)

40 V

Breakdown Voltage of

Collector-to-Emitter Voltage (BVCEO)

40 V

Breakdown Voltage of

Collector-to-Collector Voltage (BVCC)

40 V

Breakdown Voltage of

Emitter-to-Emitter Voltage (BVEE)

40 V

Collector Current (IC)

20 mA

Emitter Current (IE)

20 mA

Storage Temperature Range

−65°C to +150°C

Operating Temperature Range

−40°C to +85°C

Junction Temperature Range

−65°C to +150°C

Lead Temperature (Soldering, 60 sec)

300°C

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

THERMAL RESISTANCE

θJA is specified for the worst-case conditions, that is, a device

soldered in a circuit board for surface-mount packages.

Table 3. Thermal Resistance

Package Type

θJA

θJC

Unit

6-Lead TO-78

150

45

°C/W

ESD CAUTION