The Embedded I/O Company

TCP270

PMC Carrier for 3U CompactPCI

Application Information

The TCP270 is a standard 3U CompactPCI carrier that

provides front I/O and rear I/O for a single width PMC

module. This PMC to 3U CompactPCI adapter is used to

build modular, flexible and cost effective I/O solutions with

PMC devices in CompactPCI systems.

32 bit / 33 MHz accesses are supported on the PCI bus.

The TCP270 is used as a mechanical adaptor to connect

a standard PMC module in 3U CompactPCI systems.

The TCP270 supports PMC front I/O and optional

CompactPCI rear I/O at CompactPCI connector J2/P2.

The pin assignment corresponds to the PICMG 2.3 R1.0

PMC on CompactPCI signal mapping.

The use of PMC I/O on the J2/P2 connector (TCP270-11)

precludes the use of 64 bit CompactPCI backplanes.

The TCP270 carrier complies with the PICMG 2.0

Revision 3.0 CompactPCI specification.

Operating temperature range is -40°C to +85°C.

Technical Information

 3U 32 bit / 33 MHz CompactPCI module conforming

to PICMG 2.0 Rev 3.0

 PCI 2.2 compliant interface

 Board size: 160 mm x 100 mm

 PCI Interface: 33 MHz; 32 bit

 5V and 3.3V PCI I/O signaling voltage possible

 One PMC site conforming to PMC standard

 Front panel I/O

 CompactPCI rear I/O: Connector J2 optional

 Operating temperature -40°C to +85°C

TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice.

All trademarks mentioned are property of their respective owners.

Issue 1.0.1

2017-08-24

TEWS TECHNOLOGIES GmbH

Am Bahnhof 7

25469 Halstenbek, Germany

Phone: +49 (0) 4101 4058 0

Fax: +49 (0) 4101 4058 19

e-mail: info@tews.com

www.tews.com