MPC7410 RISC Microprocessor Hardware Specifications Addendum for the MPC7410xxnnnNE Series, Rev. 2.0

2

Freescale Semiconductor

Features

2 Features

This section summarizes changes to the features of the MPC7410 described in the MPC7410 Hardware

Specifications.

•

Bus interface

— Selectable interface voltages of 1.8 V, 2.5 V (3.3 V not supported)

4.1 DC Electrical Characteristics

Voltage to the L2 I/Os and processor interface I/Os are provided through separate sets of supply pins and

may be provided at the voltages shown in Table 2.

Table A. Part Numbers Addressed by this Data Sheet

Freescale Part

Number

Operating Conditions

Significant Differences from Hardware

Specification

CPU

Frequency

Vdd

OVdd

MPC7410RX400NE

MPC7410HX400NE

MPC7410VS400NE

MC7410VU400NE

400 MHz

1.5V±50mV

0 to

105

1.8/2.5 V

Reduced core voltage to achieve lower power

consumption. Removes 3.3V OVdd support. For

all AC/DC specifications not mentioned in this

document, please refer to the

MPC7410(RX/HX/VS)400LE and

MC7410VU400LE specifications in the general

MPC7410 Hardware Specifications.

450 MHz

1.8V

±100mV

0 to

105

1.8/2.5/3.3 V

The MPC7410(RX/HX/VS)400NE and

MC7410VU400NE also fully conform to the

MPC7410(RX/HX/VS)450LE and

MC7410VU450LE specifications, respectively.

Refer to the general

MPC7410 Hardware

Specifications.

MPC7410RX450NE

MPC7410HX450NE

MPC7410VS450NE

MC7410VU450NE

450 MHz

1.5V±50mV

0 to

105

1.8/2.5 V

Reduced core voltage to achieve lower power

consumption. Removes 3.3V OVdd support. For

all AC/DC specifications not mentioned in this

document, please refer to the

MPC7410(RX/HX/VS)450LE and

MC7410VU450LE specifications in the general

MPC7410 Hardware Specifications.

500 MHz

1.8V

±100mV

0 to

105

1.8/2.5/3.3 V

The MPC7410(RX/HX/VS)450NE and

MC7410VU400NE also fully conform to the

MPC7410(RX/HX/VS)500LE and

MC7410VU500LE specifications, respectively.

Refer to the general

MPC7410 Hardware

Specifications.