LP2902-N, LP324-N

www.ti.com

SNOSBX6C – SEPTEMBER 1999 – REVISED MARCH 2013

The circuits presented in the section on typical applications emphasize operation on only a single power supply

voltage. If complementary power supplies are available, all of the standard op amp circuits can be used. In

general, introducing a pseudo-ground (a bias voltage reference to V+/2) will allow operation above and below this

value in single power supply systems. Many application circuits are shown which take advantage of the wide

input common-mode voltage range which includes ground. In most cases, input biasing is not required and input

voltages which range to ground can easily be accommodated.

Figure 16. Driving CMOS

Figure 17. Comparator with Hysteresis

Figure 18. Non-Inverting Amplifier

Figure 19. Adder/Subtractor

Figure 20. Unity Gain Buffer

Figure 21. Positive Integrator

Copyright © 1999–2013, Texas Instruments Incorporated

Submit Documentation Feedback

7

Product Folder Links: LP2902-N LP324-N