| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
ETL9344 Datasheet(PDF) 12 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ETL9344 Datasheet(HTML) 12 Page - STMicroelectronics |
|
12 / 27 page ![]() Figure 4 : ETL9444/L9445 Oscillator. CRYSTAL OSCILLATOR Crystal Component Values Val u e R 1 ( Ω) R2 ( Ω) C1 (pF) C2 (pF) 455kHz 2.097MHz 4.7k 1k 1M 1M 220 30 220 6-36 RC CONTROLLED OSCILLATOR R (k Ω) C (pF) Instruction Cycle Time ( µs) 51 82 100 56 19 ± 15% 19 ± 13% Note : 200k Ω ≥ R ≥ 25kΩ 360pF ≥ C ≥ 50pF CKO PIN OPTIONS In a crystal controlled oscillator system, CKO is used as an output to the crystal network. As an option CKO can be a SYNC input as described above. As another option CKO can be a general purpose input, read into bit 2 of A (accumulator) upon execution of an INIL instruction. As another option, CKO can be a RAM power supply pin (VR), allowing its connec- tion to a standby/backup power supply to maintain the integrity of RAM data with minimum power drain when the main supply is inoperative or shut down to conserve power. Using either option is appropriate in applications where the ETL9444/L9445 system ti- ming configuration does not require use of the CKO pin. I/O OPTIONS ETL9444/L9445 outputs have the following optional configurations, illustrated in figure 5. a. Standard - an enhancement mode device to ground in con junction with a depletion-mode de- vice to VCC, compatible with LSTTL and CMOS input requirements. Available on SO, SK, and all D and G outputs. b. Open-Drain - an enhancement-mode device to ground only, allowing external pull-up as requi- red by the user’s application. Available on SO, SK, and all D and G outputs. c. Push-Pull - An enhancement-mode device to ground in conjunction with a depletion-mode de- vice paralleled by an enhancement-mode device to VCC. This configuration has been provided to allow for fast rise and fall times when driving ca- pacitive loads. Available on SO and SK outputs only. d. Standard L - same as a., but may be disabled. Available on L outputs only. e. Open Drain L - same as b., but may be disabled. Available on L outputs only. f. LED Direct Drive - an enhancement-mode de- vice to ground and to VCC, meeting the typical current sourcing requirements of the segments of an LED display. The sourcing device is clam- ped to limit current flow. These devices may be turned off under program control (See Functional Description, EN Register), placing the outputs in a high-impedance state to provide required LED ETL9444/9445–ETL9344/9345 12/27 |
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |