2

Package information

To meet environmental requirements, ST offers these devices in different grades of ECOPACK packages,

depending on their level of environmental compliance. ECOPACK specifications, grade definitions, and product

status are available at: www.st.com. ECOPACK is an ST trademark.

2.1

TO-220AC package information

•

Epoxy meets UL 94,V0

•

Cooling method: by conduction (C)

•

Recommended torque value: 0.55 N·m

•

Maximum torque value: 0.70 N·m

Figure 9. TO-220AC package outline

(1) : Max resin gate protusion 0.5 mm

(2) : Resin gate position is accepted in each of the two positions

shown on the drawings or their symmetrical

Note:

This package drawing may slightly differ from the physical package. However, all the specified dimensions are

guaranteed.

STPSC4G065

Package information

DS14932 - Rev 1

page 6/10