2

7

Product Specification

P6KE

Transient Voltage Suppressors

Circuit Protection

www.yageo.com

Feb. 21, 2021 V.2

Transient Voltage Suppressors (TVS) Data Sheet

Features

■ Glass passivated junction

■ Low zener impedance

■ Excellent clamping capability

■

600W peak pulse power capability at 10/1000μs waveform,

repetition rate (duty cycle): 0.01%

■ Fast response time

■ Typical IR less than 1μA above 12V.

■ High Temperature soldering guaranteed: 265℃/10 seconds/.375″,

(9.5mm) lead length, 5lbs (2.3kg) tension

■ Plastic package has underwriters laboratory flammability 94V-0

■ Meets MSL level 1, per J-STD-020.

■ Safety certification: UL: E244458

■ IEC61000-4-2 ESD 30KV Air, 30KV contact compliance

Mechanical Data

■ Case: JEDEC DO-15 Moulded plastic

■ Terminal: Axial leads, solderable per MIL-STD-750, Method 2026

■ Polarity: Color band denotes cathode except bi-directional models

■ Mounting Position: Any

■ Weight: 0.42g

Applications

■ I/O interface

■ AC/DC power supply

■ Low frequency signal transmission line (RS232, RS485, etc.)

Maximum Ratings and Characteristics

Ratings at 25℃ ambient temperature unless otherwise specified.

Rating

Symbol

Value

Units

Peak pulse power dissipation at 10/1000μs waveform

(Note1, Fig.1)

PPPM

Minimum 600

Watts

Peak pulse current of at 10/1000μs waveform (Note 1, Fig.3)

IPPM

See Table

Amps

Steady state power dissipation at TL=75℃ (Fig.5)

PM(AV)

5.0

Watts

Peak forward surge current, 8.3ms single half sine-wave

superimposed on rated load, (JEDEC Method) (Note2, Fig.6)

IFSM

100

Amps

Operating junction and Storage Temperature Range.

TJ,TSTG

-55 to +150

℃

Typical thermal resistance junction to lead

RθJL

20

℃/W

Typical thermal resistance junction to ambient

RθJA

75

℃/W

Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25℃ per Fig.2.

2. 8.3ms single half sine-wave, or equivalent square wave, duty cycle=4 pulses per minutes maximum.