To install it, the only tool needed is a screwdriver. The same used to wiring the contact block can be used to fix the push-button.

The operator will be inserted into the panel.

The holder will be secured at the back by two screws or nut.

The contact block is snapped on.

3

Specifications are subject to change without notice. Pictures are just an example. For special features and/or custumization, please ask to our sales network. 122011

Holder type “M”

Code

PB MB M

Material

Zn + PBT

Holders

Holder type “P”

Code

PB MB P

Material

PBT

Holder type “N”

Code

PB MB N

Material

PC

30/1.18”

20/0.79”

27/1.06”

20/0.79”

29/1.14”

23/0.91”

It come easy to get a complete product. Just to choose the operator, the holder, the lamp element and the contact block

(up to 3).

Assembling and Mounting

Operator

Holder

Contact block

Bezel Push Button

with PA2