| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
CML5 Datasheet(PDF) 3 Page - Clarke International |
|
|
|||||||||||||||||||||||||||||
CML5 Datasheet(HTML) 3 Page - Clarke International |
|
3 / 12 page ![]() 3 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com SAFETY PRECAUTIONS 1. ALWAYS work in accordance with the instruction handbook. 2. NEVER exceed the maximum safe working load of 680 kg, and only use the motorcycle lift for its intended purpose. 3. NEVER use the lift if it has been subjected to an abnormal load or shock. It should be removed from service immediately and fully inspected by qualified personnel, and passed as serviceable, before being used again. 4. NEVER rely upon the hydraulic ram to support the saddle when loaded. Always use the locking bar to hold the saddle in one of the positions provided. 5. ALWAYS use the lift on a solid, flat, level surface. 6. ALWAYS screw down the stabilisers before putting the saddle under load. NOTE: The castors are not designed to take the weight of the motorcycle, but are used merely to move the lift quickly and easily around the workshop. On no account must you raise a loaded platform unless the stabilisers are screwed down, and NEVER use the lift to transport a load. 7. ALWAYS use appropriate safety equipment, such as protective footwear, when using this lift. 8. ALWAYS inspect the lift before use to ensure it is in good condition, and replace any damaged or worn parts. 9. ALWAYS use spare parts supplied by Clarke International. Using non- standard parts could be extremely dangerous. 10. ENSURE the operator is trained in both operational and safety aspects. 11. NEVER leave this lift unattended whilst there is a load on it. 12. NEVER allow children or bystanders anywhere near this lift whilst it is in use. 13. NEVER use this lift to lift people or animals. UNPACKING Check to ensure that no damage has occurred during transit. Any damage should be reported to your Clarke dealer immediately. The following should be included: 1 x Main frame assembly 1 x Lifting pedal 1 x T - Handle assembly and retaining pin 1 x Locking bar handle 1 x Hydraulic pump assy c/w lowering pedal 1 x Pair of ratchet straps |
|
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |