10

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

10. Lock the chain in the Sliding

Guide by turning the Handle.

NOTE: The Handle should be

situated so that you

can easily release and

tighten it. You will

need to release it each

time you move to the

next link, and tighten it

to sharpen each link.

11. If the chain has been

repeatedly sharpened, the

chain depth limiter gauges

may need to be taken down

with a flat file (not included).

12. File down each gauge so

that they are at a lower level

than the cutting teeth.