| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
CBS2 Datasheet(PDF) 7 Page - Clarke International |
|
|
|||||||||||||||||||||||||||||
CBS2 Datasheet(HTML) 7 Page - Clarke International |
|
7 / 16 page ![]() 7 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com PREPARATION CHANGING THE SANDING BELT 1. Pull out the belt tension lever. 2. Slide the old belt away from the rollers. 3. Slide the new sanding belt into position over the front and rear rollers, ensuring that the arrows on the sanding belt and on the tool are pointing in the same direction. 4. Push the sanding belt tension lever back into the recess to apply the tension. CAUTION: DISCONNECT THE PLUG FROM THE POWER SUPPLY BEFORE CHANGING THE BELT. |
|
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |