9

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ATTACHING THE BREATHING HOSE

Insert the hose connector into the

blower receptacle until snug and

then turn 1/8 turn to the right to

lock it into place.

1. Welding helmet

2. Face seal

3. Headgear terminal

4. Breathing Hose terminal 1

5. Breathing Hose

6. Breathing Hose terminal 2

7. Blower receptacle

8. Belt

9. Blower body

Insert the breathing hose terminal into the headgear terminal and turn the

hose clockwise until the breathing hose locks in position.

TESTING THE AIR FLOW ALARM

Disconnect the breathing hose from the hood. Start the blower and block the

air flow by placing your hand over the end of the breathing hose. Continue

blocking the air flow until the alarm sounds and the blower vibrates. If the

alarm does not sound and the blower does not vibrate, check the battery

and filter element.