Physical specification

WARNINGS

•

Any external power supply used with Raspberry Pi Compute Module 5 shall comply with relevant regulations

and standards applicable in the country of intended use and be a limited power source or PS2 power source per

IEC 62368-1.

•

This product should be operated in a well-ventilated environment, and if used inside a case, the case should not be

covered.

•

Whilst in use, this product should not be contacted by conductive items.

•

The connection of incompatible devices to the Compute Module 5 IO Board may affect compliance, result in damage

to the unit, and invalidate the warranty.

•

All peripherals used with this product should comply with relevant standards for the country of use and be marked

accordingly to ensure that safety and performance requirements are met. These articles include but are not limited to

keyboards, monitors, and mice when used in conjunction with the Compute Module.

•

The cables and connectors of all peripherals used with this product must have adequate insulation so that relevant

safety requirements are met.

SAFETY INSTRUCTIONS

To avoid malfunction or damage to this product, please observe the following:

•

Do not expose to water or moisture, or place on a conductive surface whilst in operation.

•

Do not expose to heat from any source; the Raspberry Pi Compute Module 5 IO Board is designed for reliable operation

at normal ambient temperatures.

•

Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board and connectors.

•

Whilst it is powered, avoid handling the printed circuit board, or only handle it by the edges to minimise the risk of

electrostatic discharge damage.

160

36

11.5

18

90

77

52.5

8

3.5

3.5

11

19.5

25

26

19

15

13.25

11.25

22.7

61.5

3.5

Note:

All dimensions in mm

All dimensions are approximate and for reference

purposes only. The dimensions shown should not

be used for producing production data

The dimensions are subject to part and

manufacturing tolerances

Dimensions may be subject to change

Note:

All dimensions in mm

All dimensions are approximate and for

reference purposes only. The dimensions

shown should not be used for producing

production data

The dimensions are subject to part and

manufacturing tolerances

Dimensions may be subject to change

Raspberry Pi Compute Module 5 IO Board – Raspberry Pi Ltd

4