STPCCLIENT datasheet(43/48 Pages) STMICROELECTRONICS

No. de pieza	STPCCLIENT

Descripción Electrónicos	PC Compatible Embedded Microprocessor

PDF	48 Pages

Scroll/Zoom	100%

Fabricante Electrónico	STMICROELECTRONICS [STMicroelectronics]

Página de inicio	http://www.st.com

Logo

43 / 48 page

BOARD LAYOUT

Issue 1.7 - February 8, 2000

43/48

The PBGA Package also dissipates heat through

peripheral ground balls. When a heat sink is

placed on the device, heat is more uniformely

spread throughout the moulding increasing heat

dissipation through the peripheral ground balls.

The more via pads are connected to each ground

ball, the more heat is dissipated . The only limita-

tion is the risk of lossing routing channels.

Figure 6-5 shows a routing with a good trade off

between thermal dissipation and number of rout-

ing channels.

Figure 6-4. Optimum layout for central ground ball

Via to Ground layer

Pad for ground ball

Clearance = 6mil

diameter = 25 mil

hole diameter = 14 mil

Solder mask

diameter = 33 mil

External diameter = 37 mil

connections = 10 mil

Figure 6-5. Global ground layout for good thermal dissipation

Ground pad

Via to ground layer

STPCCLIENT Datasheet(PDF) 43 Page - STMicroelectronics