L5986 datasheet(17/39 Pages) STMICROELECTRONICS

17 / 39 page

L5986 - L5986A

Application information

17/39

6.4

Compensation network

The compensation network has to assure stability and good dynamic performance. The loop

of the L5986 is based on the voltage mode control. The error amplifier is a voltage

operational amplifier with high bandwidth. So selecting the compensation network the E/A

will be considered as ideal, that is, its bandwidth is much larger than the system one.

The transfer functions of PWM modulator and the output LC filter are studied (see Figure

9.). The transfer function of the PWM modulator, from the Error Amplifier output (COMP pin)

to the OUT pin, results:

Equation 10

where VS is the sawtooth amplitude. As seen in Chapter 5.1, the voltage feed forward

generates a sawtooth amplitude directly proportional to the input voltage, that is:

Equation 11

In this way the PWM modulator gain results constant and equals to:

Equation 12

The synchronization of the device with an external clock provided trough SYNCH pin can

modifies the PWM modulator gain (see Chapter 5.1 to understand how this gain changes

and how to keep it constant in spite of the external synchronization).

Table 8.

Output capacitors

Manufacturer

Series

Cap value (

μF)

Rated voltage (V)

ESR (m

Ω)

MURATA

GRM32

22 to 100

6.3 to 25

< 5

GRM31

10 to 47

6.3 to 25

< 5

PANASONIC

ECJ

10 to 22

6.3

< 5

EEFCD

10 to 68

6.3

15 to 55

SANYO

TPA/B/C

100 to 470

4 to 16

40 to 80

TDK

C3225

22 to 100

6.3

< 5

PW0

---------

⋅

PW0

---------

----

L5986 Datasheet(PDF) 17 Page - STMicroelectronics

L5986 Datasheet(HTML) 17 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39

Datasheet Descarga

Enlace URL