A05-0424-002

SpectrAlert Advance Speaker and Speaker Strobe Specifications

Architectural/Engineering Specifications

General

SpectrAlertAdvancespeakerandspeakerstrobesshallmounttoa4×4×21⁄8-inchbackbox.Auniversalmountingplateshallbeusedformountingceilingand

wall products. The notification appliance circuit and amplifier wiring shall terminate at the universal mounting plate. Also, SpectrAlert Advance speaker strobes,

whenusedwiththeSync•Circuit™Moduleaccessory,shallbepoweredfromanon-codednotificationappliancecircuitoutputandshalloperateonanominal

12or24volts.WhenusedwiththeSync•CircuitModule,12-voltratednotificationappliancecircuitoutputsshalloperatebetweennineand17.5volts;24-volt

rated notification appliance circuit outputs shall operate between 17 and 33 volts. Indoor SpectrAlert Advance products shall operate between 32°F and 120°F

from a regulated DC, or full-wave rectified, unfiltered power supply. Speaker strobes shall have field-selectable candela settings including 15, 15/75, 30, 75, 95,

110, 115, 135, 150, 177, 185.

Speaker

The speaker shall be a System Sensor SpectrAlert Advance model _______ dual-voltage transformer speaker capable of operating at 25.0 or 70.7 nominal Vrms.

It should be listed to UL 1480 and shall be approved for fire protective service. The speaker shall have a frequency range of 400 to 4000 Hz and shall have an

operating temperature between 32°F and 120°F. Speaker shall have power taps and voltage that are selected by rotary switches.

Speaker Strobe combination

The speaker strobe shall be a System Sensor SpectrAlert Advance model __________ listed to UL1480 and UL 1971 and be approved for fire protective signaling

systems. Speaker shall be capable of operating at 25.0 or 70.7 nominal Vrms selected via rotary switch, and shall have a frequency range of 400 to 4000 Hz.

Speaker shall have power taps which are selected by rotary switch. The strobe shall comply with the NFPA72 requirements for visible signaling appliances,

flashing at 1 Hz over the strobe’s entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system.

Synchronization Module

ThemoduleshallbeaSystemSensorSync•CircuitmodelMDLlistedtoUL464andshallbeapprovedforfireprotectiveservice.Themoduleshallsynchronize

SpectrAlertstrobesat1Hz.Themoduleshallmounttoa411⁄16×411⁄16×21⁄8-inchbackbox.ThemoduleshallalsocontroltwoStyleY(classB)circuitsoroneStyle

Z (class A) circuit. The module shall synchronize multiple zones. Daisy chaining two or more synchronization modules together will synchronize all the zones

they control. The module shall not operate on a coded power supply.

Physical Specifications

Operating Temperature

32°F to 120°F (0°C to 49°C)

Humidity Range

10 to 93% non-condensing

Dimensions, Wall-Mount

SPS Speaker Strobe

6.0inL×5.0inW×4.7inD(includinglensandspeaker)

SPSV Speaker Strobe

6.0inL×5.0inW×4.9inD(includinglensandspeaker)

SP Speaker

6.0inL×5.0inW×2.8inD

SPSV Speaker

6.0inL×5.0inW×2.9inD

Dimensions, Ceiling-Mount

SPS Speaker Strobe

6.8inDia.×4.7inD(includinglensandspeaker)

SPSV Speaker Strobe

6.8inDia.×4.8inD(includinglensandspeaker)

SP Speaker

6.8inDia.×2.8inD

SPV Speaker

6.8inDia.×2.9inD

Electrical/Operating Specifications

Nominal Voltage (speakers)

25 Volts or 70.7 Volts (nominal)

Maximum Supervisory Voltage (speakers)

50 VDC

Strobe Flash Rate

1 flash per second

Nominal Voltage (strobes)

Regulated 12 VDC/FWR or regulated 24 DC/FWR

Operating Voltage Range (includes fire alarm

panels with built in sync)

8 to 17.5 V (12 V nominal) or 16 to 33V (24 V nominal)

Operating Voltage with MDL Sync Module

9 to 17.5 V (12 V nominal) or 17 to 33V (24 V nominal)

Frequency Range

400 to 4000 Hz

Power

¼, ½, 1, 2 watts