13

MUlTIPROTOCOl XFP OPTICAl TRANSCEIvER

—1310 NM FOR UP TO 10 KM REACH

Feature

Test Method

Performance

Component safety

UL 60950

UL Certificate

UL94-V0

UL Certificate

EN 60950

TUV Report/Certificate (CB Scheme)

RoHS-compliance

Directive 2002/95/EC

Compliant per the Directive 2002/95/EC of the European

Parliament and of the Council of 27 January 2003 on the

restriction of the use of certain hazardous substances in

electrical and electronic equipment.

Laser eye safety

EN 60825

TUV Certificate

U.S. 21CFR (J) 1040.10

CDRH compliant and Class 1 laser safe.

ElectromagneticCompatibility

Electromagnetic emissions

EMC Directive 89/336/EEC

Noise frequency range: 30 MHz to 40 GHz.

FCC CFR47 Part 15

Good system EMI design practice required

IEC/CISPR 22

to achieve Class B margins.

AS/NZS CISPR22

EN 55022

ICES-003, Issue 4

VCCI-03

Electromagnetic immunity

EMC Directive 89/336/EEC

IEC /CISPR/24

EN 55024

ESDimmunity

EN61000-4-2

Exceedsrequirements.Withstandsdischargesof;

8 kV contact, 15 kV air

Radiated immunity

EN 61000-4-3

Exceeds requirements. Field strength of 10 V/m RMS,

from 10 MHz to 1 GHz. No effect on transmitter/receiver

performance is detectable between these limits.

Table 2 Regulatory Compliance

3.11 Regulatory Compliance

The 10 Gbps 1310 nm multiprotocol XFP optical transceiver is lead-free and RoHS

6/6 compliant per Directive 2002/95/EC of the European Parliament and of the

Council of 27 January 2003 on the restriction of the use of certain hazardous sub-

stances in electrical and electronic equipment.

The JDSU 10 Gbps 1310 nm multiprotocol XFP optical transceiver complies with

international electromagnetic compatibility (EMC) and international safety re-

quirements and standards. EMC performance is dependent on the overall system

design. Information included herein is intended as a figure of merit for designers

to use as a basis for design decisions.

3.12

PCB layout

Recommended PCB layout is given in XFP MSA INF8077i Rev. 4.5.