TLC320AC01C datasheet(21/90 Pages) TI

21 / 90 page

2–7

2.8.2

Notes on TLC320AC01/02 AIC Master-Slave Operation

Master/slave operational detail is summarized in the following notes:

The slave devices can be programmed independently of the master as long as the clock divide

independently.

The method that is used to program a slave independently is to request a secondary

communication of the master and all slaves and ripple the delayed frame sync to the desired slave

device to be programmed.

Secondary frame syncs must be requested for all devices in the system or none. This is required

so that the master generates secondary frames for the slaves and allows the slaves to know that

the second frame syncs they receive are secondary frame syncs. Each device in the system must

receive a secondary frame request in its corresponding primary frame sync period (11 in the last

2 LSBs).

Calculation of the sampling frequency in terms of the master clock and the shift clock and the

respective register ratios is (see equations 4–6):

Sampling frequency

+ fs +

FCLK

B register value

f(MCLK)

2 (A register value)

(B register value)

(4)

Therefore,

f(MCLK)

+ 2

(A register value)

(B register value)

(5)

and in terms of the shift clock frequency, since

(6)

f(SCLK)

(A register value)

(B register value)

Number of SCLK periods

Sampling period

f(MCLK)

+ 4

f(SCLK)

then

The minimum number of shift clocks between falling edges of any two frame syncs is 18 because

the frame sync delay register minimum number is 18.

When a secondary communication is requested by the host, the master secondary frame sync

begins at the middle of the sampling period (followed by the slave secondary frame syncs), so all

primary frame sync intervals (master and slave) must occur within one-half the sampling time.

TLC320AC01C Datasheet(PDF) 21 Page - Texas Instruments

TLC320AC01C Datasheet(HTML) 21 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90

Datasheet Descarga

Enlace URL