MPC8533ECVTAAFB datasheet(39/116 Pages) FREESCALE

39 / 116 page

MPC8533E PowerQUICC™ III Integrated Processor Hardware Specifications, Rev. 3

Freescale Semiconductor

Ethernet Management Interface Electrical Characteristics

Figure 22 shows the MII management AC timing diagram.

Figure 22. MII Management Interface Timing Diagram

MDC fall time

tMDHF

—

Notes:

1. The symbols used for timing specifications follow the pattern of t(first two letters of functional block)(signal)(state)(reference)(state) for

inputs and t(first two letters of functional block)(reference)(state)(signal)(state) for outputs. For example, tMDKHDX symbolizes management

data timing (MD) for the time tMDC from clock reference (K) high (H) until data outputs (D) are invalid (X) or data hold time.

Also, tMDDVKH symbolizes management data timing (MD) with respect to the time data input signals (D) reach the valid state

(V) relative to the tMDC clock reference (K) going to the high (H) state or setup time. For rise and fall times, the latter

convention is used with the appropriate letter: R (rise) or F (fall).

2. This parameter is dependent on the platform clock frequency (MIIMCFG [MgmtClk] field determines the clock frequency of

the MgmtClk Clock EC_MDC).

3. This parameter is dependent on the platform clock frequency. The delay is equal to 16 platform clock periods ±3 ns. For

example, with a platform clock of 333 MHz, the min/max delay is 48 ns ± 3 ns. Similarly, if the platform clock is 400 MHz, the

min/max delay is 40 ns ± 3 ns).

4. tplb_clk is the platform (CCB) clock.

Table 36. MII Management AC Timing Specifications (continued)

At recommended operating conditions with OVDD is 3.3 V ± 5%.

Parameter/Condition

Symbol1

Min

Typ

Max

Unit

Notes

MDC

tMDDXKH

tMDC

tMDCH

tMDCR

tMDCF

tMDDVKH

tMDKHDX

MDIO

(Input)

(Output)

MPC8533ECVTAAFB Datasheet(PDF) 39 Page - Freescale Semiconductor, Inc