MPC8308CVMAFDA datasheet(74/88 Pages) FREESCALE

No. de pieza	MPC8308CVMAFDA

Descripción Electrónicos	MPC8308 PowerQUICC II Pro Processor Hardware Specification

PDF	88 Pages

Scroll/Zoom	100%

Fabricante Electrónico	FREESCALE [Freescale Semiconductor, Inc]

Página de inicio	http://www.freescale.com

Logo

74 / 88 page

MPC8308 PowerQUICC II Pro Processor Hardware Specification, Rev. 0

Freescale Semiconductor

Package and Pin Listings

XCOREVDD

A14, B12, C13

—

XCOREVSS

A12, B14, C11, D11,

D13, G11, H11, H13

—

Notes:

1. This pin is an open drain signal. A weak pull-up resistor (1 k

Ω) should be placed on this pin to NV

2. This pin is an open drain signal. A weak pull-up resistor (2–10 k

Ω) should be placed on this pin to NV

DD.

3. This output is actively driven during reset rather than being three-stated during reset.

4. This pin has weak internal pull-up that is always enabled. 5. This pin must always be tied to VSS.

6. Internal thermally sensitive resistor, resistor value varies linearly with temperature. Useful for determining the junction

temperature.

7. The LB_POR_CFG_BOOT_ECC is sampled only during the PORESET negation. This pin with an internal pull down resistor

enables the ECC by default. To disable the ECC an external strong pull up resistor or a buffer released to high impedance

is needed.

8. This pin has weak internal pull-down that is always enabled

Table 53. MPC8308 Pinout Listing (continued)

Signal

Package Pin Number

Pin Type

Power

Supply

Notes

MPC8308CVMAFDA Datasheet(PDF) 74 Page - Freescale Semiconductor, Inc