ELECTRONIC COMPONENTS

SHARP IrDA Control Infrared Transceiver

SHARP Electronic Components

2

Rev. 1.1.1 November 26, ‘98

Record of Modification and Revision

Version

Issue Date

Comments

0.9

October 17th, 1997

First Edition

0.92

February 23rd, 1998

Outline Dimensions Modified

0.95

March 31st, 1998

Name of compliant standard changed to “IrDA Control”

Compliant Specification is limited to “IrDA Control Peripheral Type 1”.

0.96

April 1st, 1998

Outline Dimension Modified (Eliminate Shield of Front).

1.0

August 25th, 1998

Outline Dimension and Absolute Maximum Rating Modified

1.1

November 6th, 1998

Outline Dimension and Recommended Circuit Modified

1.1.1

November 26th, 1998

Recommended Operating Conditions Modified

(Preliminary Information Disclaimer)

This document includes a “Preliminary Information” of Sharp IrDA Control Infrared Transceiver (for IrDA Control

Peripheral Type 1). Any of information under this document, such as Specifications and outline dimensions, are

applicable only for reference purpose, and Sharp hold all rights to change or alter prices at any time without notice.

In absence of confirmation by device Specification Sheets, SHARP takes no responsibility for any defects that occur in

equipment using any of SHARP’s device, shown in catalogues, data books, Preliminary Information, etc. Contact

SHARP, or SHARP local representatives in order to obtain the latest version of the device Specification Sheets before

using any SHARP’s devices.