DL4 datasheet(54/76 Pages) ITT

54 / 76 page

Dimensions are shown in mm (inch)

Dimensions subject to change

ZIF Connectors

Contacts

Crimp Contacts — Reeled

Reeled

µ inch gold contacts:

Recommended for all applications.

Offer the broadest amperage range.

Mandatory for low current applications (less

than 100 milliamps).

Material:

Copper Alloy

Finish:

Gold over nickel

Extraction Tool: 274-7029-007

Insertion Tool: None Required

Note: Automatic tooling is recommended for

volume over 50K per year, see page 59.

Plug (Bump)

Receptacle (Flat)

Wire

Accommodation

Plug

µInch Gold

Bump

Receptacle

µInch Gold

Flat

Plug and

Receptacle

µInch Gold

Hand

Tool

(Page 55)

40 thru 42 AWG

—

127000-2278*

36 thru 38 AWG

—

127000-1271*

28 thru 32 AWG

110238-0482

110238-0486

110238-0403

24 thru 26 AWG

110238-0480

110238-0484

110238-0401

20 thru 22 AWG

110238-0479

110238-0483

110238-0400

18 thru 20 AWG

110238-0481

110238-0485

110238-0402

Note: For more information on tools and assembly, see pages 54-59.

Non Insulation Support

For low current applications (less than 100 milliamps) use 50

µ inch gold (bump) contact on plug side and 50µ inch gold (flat) contact on receptacle side.

Contact Factory for tool.

Finish: 20

µ inch gold in mating area/Gold flash on balance (terminating end).

Finish: 20

µ inch gold in mating area/Tin lead on balance (terminating end).

DL4 Datasheet(PDF) 54 Page - ITT Industries

DL4 Datasheet(HTML) 54 Page - ITT Industries

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76

Datasheet Descarga

Enlace URL