Si4010-DK

4

Rev. 0.1

1.1.3. Si4010 MSOP Key Fob Development Board 434 MHz, SMA (P/N 4010-DKPB434-BM)

This development board has an unburned soldered Si4010, five push buttons, matched 50

 SMA RF output,

battery clip, and battery switch. This board allows running user application from RAM during program development

even while board is disconnected and powered by the battery. The SMA output connector allows wired

measurements of the RF output signal.

Note: Instead of this board, some 434 MHz development kits may contain the pcb antenna version of this board, described in

"1.2.2. Si4010 Key Fob Development Board 434 MHz" on page 7.

1.1.4. Si4355 RFStick 434MHz receiver board (P/N 4355-LED-434-SRX)

Receiver board factory programmed with the simple receiver program srx_demo. Can be used for link testing with

Si4010 programmed with the rke_demo.

1.1.5. Programming Interface Board (P/N MSC-BA5)

Adapter board for interfacing customer PCB to the debug adapter.