TS4621ML datasheet(25/40 Pages) STMICROELECTRONICS

25 / 40 page

TS4621ML

Application information

Doc ID 023181 Rev 1

25/40

Application information

4.1

Gain control

The TS4621ML has two gain settings which are controlled via the GAIN pin:

Note:

See Table 5: Electrical characteristics of the amplifier for VIH and VIL levels.

4.2

Overview of the class-G, 2-level headphone amplifier

The TS4621ML uses what is referred to as class-G operating mode. This mode is a

combination of the class AB biasing technique and an adaptive power supply. For this

device, the power supply uses two levels: ±1.2 V and ±1.9 V.

To create the ±1.2 V and ±1.9 V levels, the device uses an internal high-efficiency step-

down converter linked with a fully capacitive inverter from AVdd. Thanks to these internally-

generated symmetrical power supply voltages, the output of the amplifier can be biased at

0 V, thus eliminating the classical bulky DC blocking output capacitors (typically more than

100

μF).

Figure 64.

TS4621ML architecture

When an audio signal is playing with the TS4621ML, the class G feature adjusts in real time

the internal power supply voltage in order to achieve the best efficiency possible. In addition,

thanks to the fast transient response of the internal DC/DC converters, the switching

between ±1.2 V and ±1.9 V can be achieved without audio clipping. Moreover, the out-of-

GAIN voltage

Amplifier gain

≤ 0.6 V

0 dB

≥ 1.3 V6 dB

C12

2.2 uF

Css

2.2 uF

10 uF

3.3 uH

Vbat

Full capacitive

inverter

Vout

In+

In-

1.2 V to 1.9 V

-1.2 V to -1.9 V

0 V

+Vout

-Vout

Level

detector

DC/DC

control

HPVdd

PVss

AM06150

TS4621ML Datasheet(PDF) 25 Page - STMicroelectronics

TS4621ML Datasheet(HTML) 25 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Datasheet Descarga

Enlace URL