SS5682

Unipolar Hall Switch

3

V2.00 May 1, 2012

Pins Definition and Description

SOT Pin №

SIP Pin №

Name

Type

Function

1

1

VDD

Supply

Supply Voltage pin

2

3

OUT

Output

Open Drain Output pin

3

2

GND

Ground

Ground pin

Unique Features

Based on mixed signal CMOS technology, SS5682 is a Hall-effect device with high magnetic sensitivity. This

multi-purpose latch meets most of the application requirements.

The chopper-stabilized amplifier uses switched capacitor technique to suppress the offset generally observed with Hall

sensors and amplifiers. The CMOS technology makes this advanced technique possible and contributes to smaller chip

size and lower current consumption than bipolar technology. The small chip size is also an important factor to minimize

the effect of physical stress. This combination results in more stable magnetic characteristics and enables faster and more

precise design.

The wide operating voltage from 2.5V to 24V, low current consumption and large choice of operating temperature range

according to “L”, “K”and “E” specifications make this device suitable for automotive, industrial and consumer

applications.

Absolute Maximum Ratings

Parameter

Symbol

Value

Units

Supply Voltage

VDD

28

V

Supply Current

IDD

50

mA

Output Voltage

VOUT

28

V

Output Current

IOUT

50

mA

Storage Temperature Range

TS

-50 to 150

°C

Maximum Junction Temperature

TJ

165

°C