PI5C3245

8-Bit, 2-Port Bus Switch

3

PS7015D

05/11/06

12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012

12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

Power Supply Characteristics

Parameters Description

Test Conditions

(1)

Min.

Typ

(2)

Max.

Units

Quiescent Power

0.1

3.0

μA

Supply Current

Supply Current per

2.5

mA

Input @ TTL HIGH

Supply Current per

0.25

mA/

A and B Pins Open

MHz

BE = GND

Control Input Toggling

50% Duty Cycle

Notes:

1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device.

4. This current applies to the control inputs only and represent the current required to switch internal capacitance at the specified frequency. The

A and B inputs generate no significant AC or DC currents as they transition. This parameter is not tested, but is guaranteed by design.

Switching Characteristics over Operating Range

PI5C3245

Com.

Parameters

Description

Conditions

Min.

Max.

Units

0.25

Ax to Bx, Bx to Ax

Bus Enable Time

1.5

6.5

ns

BE to Ax or Bx

Bus Disable Time

1.5

5.5

BE to Ax or Bx

Notes:

1. This parameter is guaranteed but not tested on Propagation Delays.

2. The bus switch contributes no propagational delay other than the RC delay of the ON resistance of the switch and the load capacitance. The

time constant for the switch alone is of the order of 0.25ns for 50pF load. Since this time constant is much smaller than the rise/fall times of

typical driving signals, it adds very little propagational delay to the system. Propagational delay of the bus switch when used in a system is

determined by the driving circuit on the driving side of the switch and its interaction with the load on the driven side.

06-0239