STLBC01 datasheet(35/40 Pages) STMICROELECTRONICS

No. de pieza	STLBC01

Descripción Electrónicos	Bluetooth low energy controller

PDF	40 Pages

Scroll/Zoom	100%

Fabricante Electrónico	STMICROELECTRONICS [STMicroelectronics]

Página de inicio	http://www.st.com

Logo

35 / 40 page

DocID022984 Rev 2

35/40

STLBC01

Vendor HCI events

This section defines the STBLC01 vendor events. There is no special event mask defined

for vendor events in the STBLC01. This means that the host cannot avoid receiving vendor

events.

10.1

STBLC_POWER_MODE_IDLE

This event reports that the device has correctly entered idle mode. This event is also sent

after watchdog or bus error resets. This event is sent after POR and HCI resets.

The associated event code is 0xFF.

10.1.1

Event parameters

10.2

Hardware error event codes

The hardware error event is a standard BT event. The STBLC01 defines additional

parameter codes as follows:

Table 29. Event parameters for STBLC_POWER_MODE_IDLE

Parameter

Size

Description

STBLC_Event_Code

0x01

Table 30. Hardware error event codes

Code

Description

0x00

No error

0x01

HCI synchronization lost

0x02

RF initialization fail (auto-calibration)

0x03

RF system error

0x04

CPU reset (watchdog, bus error)

STLBC01 Datasheet(PDF) 35 Page - STMicroelectronics