STM8AF6146 datasheet(23/89 Pages) STMICROELECTRONICS

23 / 89 page

STM8AF61xx, STM8AF62xx

Product overview

Doc ID 14952 Rev 6

23/89

UART mode

●

Full duplex, asynchronous communications - NRZ standard format (mark/space)

●

High-precision baud rate generator

–

A common programmable transmit and receive baud rates up to fMASTER/16

●

Programmable data word length (8 or 9 bits) – 1 or 2 stop bits – parity control

●

Separate enable bits for transmitter and receiver

●

Error detection flags

●

Reduced power consumption mode

●

Multi-processor communication - enter mute mode if address match does not occur

●

Wakeup from mute mode (by idle line detection or address mark detection)

●

Two receiver wakeup modes:

–

Address bit (MSB)

–

Idle line

5.10

Input/output specifications

The product features four different I/O types:

●

Standard I/O 2 MHz

●

Fast I/O up to 10 MHz

●

High sink 8 mA, 2 MHz

●

True open drain (I2C interface)

To decrease EMI (electromagnetic interference), high sink I/Os have a limited maximum

slew rate. The rise and fall times are similar to those of standard I/Os.

The analog inputs are equipped with a low leakage analog switch. Additionally, the schmitt-

trigger input stage on the analog I/Os can be disabled in order to reduce the device standby

consumption.

STM8A I/Os are designed to withstand current injection. For a negative injection current of

4 mA, the resulting leakage current in the adjacent input does not exceed 1 µA. Thanks to

this feature, external protection diodes against current injection are no longer required.

STM8AF6146 Datasheet(PDF) 23 Page - STMicroelectronics

STM8AF6146 Datasheet(HTML) 23 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89

Datasheet Descarga

Enlace URL