ADE04SA datasheet(16/326 Pages) MACOM

16 / 326 page

A16

Catalog 1308390

Dimensions are in inches

Dimensions are shown for

USA: 1-800-522-6752

South America: 55-11-3611-1514

Issued 9-04

and millimeters unless otherwise

reference purposes only.

Canada: 1-905-470-4425

Hong Kong: 852-2735-1628

specified. Values in parentheses

Specifications subject

Mexico: 01-800-733-8926

Japan: 81-44-844-8013

www.tycoelectronics.com

or brackets are metric equivalents. to change.

C. America: 52-55-5-729-0425

UK: 44-141-810-8967

7100 Series

DIP Switches

Alcoswitch 7100 Series DIP

Switches are recommended

for programming

applications where the

number of cycles per pole is

limited. These single pole,

single throw switches have

been designed for a life of

up to 2000 cycles per pole

and feature contacts of

copper alloy with .000030

[0.00076] gold over nickel

plating in the contact area

and legs plated to meet

Tyco Electronics

Solderability Specification

109-11-3. In addition, the

SPST standard and low

profile switches are also

available with a top seal to

provide protection during

soldering and cleaning

processes.

Performance Characteristics

Current and Voltage Rating:

Nonswitching — 1.0 amperes max. at 40 VDC

Switching — 60 milliamperes max at 5 VDC (resistive load);

15 milliamperes max. at 24 VDC (resistive load)

Contact Resistance, Dry Circuit:

100 milliohms max. (end of life) and 50 milliohms (initial) at 50 mV open

circuit, 50 milliamperes

Insulation Resistance:

1 x 109 ohms min. at 100 VDC (initial)

Dielectric Withstanding Voltage:

500 VDC min. at standard atmosphereic conditions

Capacitance:

5 picofarads max.

Temperature Rating:

Nonoperating — -73°C to +105°C

Operating — -55°C to +105°C

Vibration:

Discontinuities shall not exceed 10 microseconds when subjected to

10-2000-10 Hz transversing for 20 minutes at .060 [1.52] inches total

excursion

Shock:

No physical damage or discontinuities greater than 10 microseconds

when tested with .10 ampere current applied per Tyco Electronics

Specification 109-26, Condition A

Humidity:

Withstands an environment of +40°C and 95% RH for 96 hours

Durability:

No physical damage or contact resistance greater than 100 milliohms

after 2000 cycles of actuation with a resistive load of 24 VDC and 25

milliamperes max. current applied

Terminal Strength (Bend Test):

Two (2) 45° bend cycles per MIL-STD-202, Method 211, Condition B

Materials

Housing:

Glass-filled polyester, 94V-0 rated, blue

Rocker:

Thermoplastic, 94V-0 rated, white

Spring Contacts and Leads:

Copper alloy with .000030 [0.00076] gold over .000050 [0.00127] nickel

in contact area and .000150 [0.00381] tin-lead over .000050 [0.00127]

nickel on solder legs, plated to meet Tyco Electronics Solderability

Specification 109-11-3.

Technical Documents

Product Specification:

108-7532

Instruction Sheet:

408-07779

Application Specification:

114-1056

ADE04SA Datasheet(PDF) 16 Page - Tyco Electronics

ADE04SA Datasheet(HTML) 16 Page - Tyco Electronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Descarga

Enlace URL