LM339ADE4 datasheet(4/33 Pages) TI

4 / 33 page

LM139, LM239, LM339

LM139A, LM239A, LM339A

LM2901, LM2901AV, LM2901V

SLCS006S – OCTOBER 1979 – REVISED AUGUST 2012

www.ti.com

ABSOLUTE MAXIMUM RATINGS

(1)

over operating free-air temperature range (unless otherwise noted)

MIN

MAX

UNIT

VCC

Supply voltage(2)

VID

Differential input voltage(3)

±36

Input voltage range (either input)

–0.3

Output voltage

Output current

Duration of output short circuit to ground(4)

Unlimited

D package

DB package

θJA

Package thermal impedance, junction to free air(5) (6)

N package

°C/W

NS package

PW package

113

FK package

5.61

θJC

Package thermal impedance, junction to case(7) (8)

J package

15.05

°C/W

W package

14.65

Operating virtual-junction temperature

150

°C

Case temperature for 60 s

FK package

260

°C

Lead temperature 1,6 mm (1/16 in) from case for 60 s

J package

300

°C

Tstg

Storage temperature range

–65

150

°C

(1)

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating

conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

All voltage values, except differential voltages, are with respect to network ground.

(3)

Differential voltages are at IN+ with respect to IN–.

(4)

Short circuits from outputs to VCC can cause excessive heating and eventual destruction.

(5)

Maximum power dissipation is a function of TJ (max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient

temperature is PD = (TJ (max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.

(6)

The package thermal impedance is calculated in accordance with JESD 51-7.

(7)

Maximum power dissipation is a function of TJ (max), θJC, and TC. The maximum allowable power dissipation at any allowable case

temperature is PD = (TJ (max) – TC)/θJC. Operating at the absolute maximum TJ of 150°C can affect reliability.

(8)

The package thermal impedance is calculated in accordance with MIL-STD-883.

Submit Documentation Feedback

Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V

LM339ADE4 Datasheet(PDF) 4 Page - Texas Instruments

LM339ADE4 Datasheet(HTML) 4 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Datasheet Descarga

Enlace URL