| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
ADE7978 Datasheet(PDF) 29 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADE7978 Datasheet(HTML) 29 Page - Analog Devices |
|
29 / 120 page ![]() Data Sheet ADE7978/ADE7933/ADE7932 Rev. 0 | Page 29 of 120 Gain Error Gain error in the ADE7933/ADE7932 represents the difference between the measured ADC output code (minus the offset) and the ideal output code (see the Current Channel ADC and Voltage Channel ADCs sections). The difference is expressed as a percent- age of the ideal code and represents the overall gain error of one current or voltage channel. Gain Drift over Temperature Gain drift is the change in gain over temperature. The gain temperature coefficient includes the temperature variation of the ADC gain and of the internal voltage reference. Gain drift over temperature represents the overall temperature coefficient of one current or voltage channel. With the internal voltage reference in use, the ADC gain is measured at −40°C, +25°C, and +85°C. The temperature coefficient is computed as follows: Drift = ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ° − ° × ° ° − ° ° − ° − × ° ° − ° − C 25 C 85 C 25 C 25 C 85 , C 25 C 40 C 25 C 25 C 40 max Gain Gain Gain Gain Gain Gain Gain drift is measured in ppm of FS/°C. Power Supply Rejection (PSR) PSR quantifies the ADE7978 and ADE7933/ADE7932 chipset measurement error as a percentage of reading when the power supplies are varied. For the ac PSR measurement, a reading at nominal supplies (3.3 V) is taken when the voltage at the input pins is 0 V. A second reading is obtained with the same input signal levels when an ac signal (120 mV rms at 50 Hz or 100 Hz) is introduced onto the supplies. Any error introduced by this ac signal is expressed as a percentage of reading (power supply rejection ratio, PSRR). PSR = 20 log10 (PSRR). For the dc PSR measurement, a reading at nominal supplies (3.3 V) is taken when the voltage between the IP and IM pins is 6.25 mV rms, and the voltages between the V1P, V2P, and VM pins are 100 mV rms. A second reading is obtained with the same input signal levels when the power supplies are varied by ±10%. Any error introduced is expressed as a percentage of the reading (PSRR). PSR = 20 log10 (PSRR). |
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |