MP2565 – 2.5A, 4MHz, 50V STEP-DOWN CONVERTER

MP2565 Rev. 0.91

www.MonolithicPower.com

17

4/19/2011

MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.

© 2011 MPS. All Rights Reserved.

PCB LAYOUT GUIDE

PCB layout is very important to achieve stable

operation. It is highly recommended to duplicate

EVB layout for optimum performance.

If change is necessary, please follow these

guidelines and take Figure 6 for reference.

1) Keep the path of switching current short

and minimize the loop area formed by Input

cap, high-side MOSFET and external

switching diode.

2) Bypass ceramic capacitors are suggested

3) Ensure all feedback connections are short

and direct. Place the feedback resistors

and compensation components as close to

the chip as possible.

4) Route SW away from sensitive analog

areas such as FB.

5) Connect IN, SW, and especially GND

respectively to a large copper area to cool

the chip to improve thermal performance

and long-term reliability.

MP2565

MP2565 Typical Application Circuit

TOP Layer

Bottom Layer

MP2565DN Layout Guide