MP28251GD datasheet(2/15 Pages) MPS

2 / 15 page

MP28251 – 20V, 4A SYNCHRONOUS STEP-DOWN CONVERTER

MP28251 Rev. 1.16

www.MonolithicPower.com

4/17/2013

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

ORDERING INFORMATION

Part Number

Package

Top Marking

MP28251GD*

QFN14 (2×3mm)

ABM

* For Tape & Reel, add suffix –Z (eg. MP28251GD–Z);

PACKAGE REFERENCE

2x3 QFN14

ABSOLUTE MAXIMUM RATINGS (1)

VIN ..................................................-0.3V to 22V

VSW..................................................-0.3V to 23V

VBST ...................................................... VSW + 6V

All Other Pins................................ -0.3V to 6V

(2)

Junction Temperature...............................150°C

Lead Temperature ....................................260°C

Continuous Power Dissipation (TA = +25°C)

(3)

2x3 QFN14 ................................................ 1.8W

Junction Temperature

150°C

Operating Temperature.............. -40°C to +85°C

Recommended Operating Conditions

(4)

Supply Voltage VIN .........................4.75V to 20V

Output Voltage VOUT.........................0.8V to 17V

Operating Junction Temp. (TJ) -40°C to +125°C

Thermal Resistance

(5)

θJA

θJC

QFN14 (2x3mm)..................... 70 ...... 15... °C/W

Notes:

1) Exceeding these ratings may damage the device.

2) Please refer to page 9, Enable Control section, For absolute

maximum rating of EN pin.

3) The maximum allowable power dissipation is a function of the

maximum junction temperature TJ (MAX), the junction-to-

ambient thermal resistance θJA, and the ambient temperature

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD (MAX) = (TJ

(MAX)-TA)/θJA. Exceeding the maximum allowable power

dissipation will cause excessive die temperature, and the

regulator will go into thermal shutdown. Internal thermal

shutdown circuitry protects the device from permanent

damage.

4) The device is not guaranteed to function outside of its

operating conditions.

5) Measured on JESD51-7, 4-layer PCB.

MP28251GD Datasheet(PDF) 2 Page - Monolithic Power Systems

MP28251GD Datasheet(HTML) 2 Page - Monolithic Power Systems

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Datasheet Descarga

Enlace URL