MRV (West Coast USA)

20415 Nordhoff St.

Chatsworth, CA 91311

800-338-5316

818-773-0900

MRV (East Coast USA)

295 Foster St.

Littleton, MA 01460

800-338-5316

978-952-4700

MRV (International)

Bussiness Park Moerfelden

Waldeckerstrasse 13

64546 Moerfelden-Walldorf

Germany

Tel. (49) 6105/2070

Fax. (49) 6105/207-100

MRV has more than 50 offices throughout the world. Addresses, phone numbers, and fax numbers are listed at www.mrv.com.

Please e-mail us at sales@mrv.com or call us for assistance.

All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness

thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact MRV Communications for more information. MRV Communications and the MRV Communications

logo are trademarks of MRV Communications, Inc. Other trademarks are the property of their respective holders.

MRV-LD-TMDXFP

Rev.2

11-11

Copyright ©2011 MRV Communications, Inc. All Rights Reserved.

Product

Description

TM-DXFPF8T

10GE/OC192 FEC DWDM tunable wave transponder, XFP Access port, up 80km operating distance with

EYEMAX

Operating Temperature

Storage Temperature

Relative Humidity

85% max, non-condensing

Dimensions (W x H x D)

26.93 x 130.7 x 227 mm (1.06 x 5.145 x 8.936 in)

Weight

0.700 kg (1.54 lb)

Connector

Access: XFP Trunk: MU

Power consumption

Module

XFP

13.5 W

3.5W

Enviromental

Technical Specifications

WDM TX power (dBm)

4 -7

Maximum receiver sensitivity (dBm)

-30

Overload (dBm)

- 8

DWDM wavelengths range

1528 - 1561nm on ITU-T G694.1 50Ghz grid

Wavelengths Accuracy

+/-10pm

Wavelengths Tuning

Time - cold start (sec)

30

Wavelengths Tuning

Time - warmed - up (sec)

0.5

Chromatic Dispersion tolerance at 1525nm - 1570nm

1600 ps/nm

Dispersion penalty at limit (dB)

2db

TM-DXFPF8T is a single short slot size module also capable

of Y-cable protection .

The Link Integrity Notification (LIN) function allows the

terminal equipment to detect link failure in the path between

two terminal equipment units regardless of the location of

the failure.

The LIN function is automatically disabled for SONET/SDH

signals.

The transponder provides power monitoring of the trunk

(DWDM) port in addition to Digital Diagnostics provided by

the XFP of the access port.

The transaponder can be managed either with the

terminal (CLI) or remotely from on SNMP manager such as