LM10

SNOSBH4D – MAY 1998 – REVISED MARCH 2013

www.ti.com

Figure 3. PDIP Package (P)

Figure 4.

See Package Number P (R-PDIP-T8)

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

Absolute Maximum Ratings

(1) (2) (3)

LM10/LM10B/

LM10BL/

LM10C

LM10CL

Total Supply Voltage

45V

7V

±40V

±7V

internally limited

continuous

Storage-Temp. Range

−55°C to +150°C

Lead Temp. (Soldering, 10 seconds)

TO

300°C

Lead Temp. (Soldering, 10 seconds) DIP

260°C

Vapor Phase (60 seconds)

215°C

Infrared (15 seconds)

220°C

ESD rating is to be determined.

Maximum Junction Temperature

LM10

150°C

LM10B

100°C

LM10C

85°C

(1)

Refer to RETS10X for LM10H military specifications.

(2)

Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for

which the device is functional, but do not ensure specific performance limits.

(3)

If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications.

(4)

The Input voltage can exceed the supply voltages provided that the voltage from the input to any other terminal does not exceed the

(5)

The maximum, operating-junction temperature is 150°C for the LM10, 100°C for the LM10B(L) and 85°C for the LM10C(L). At elevated

temperatures, devices must be derated based on package thermal resistance.

(6)

Internal thermal limiting prevents excessive heating that could result in sudden failure, but the IC can be subjected to accelerated stress

with a shorted output and worst-case conditions.

2

Submit Documentation Feedback

Copyright © 1998–2013, Texas Instruments Incorporated

Product Folder Links: LM10