LMC6462, LMC6464

www.ti.com

SNOS725D – MAY 1999 – REVISED MARCH 2013

Figure 36. Resistive Isolation of a 300 pF Capacitive Load

Figure 37. Pulse Response of the LMC6462 Circuit Shown in Figure 36

Figure 37 displays the pulse response of the LMC6462/4 circuit in Figure 36.

Another circuit, shown in Figure 38, is also used to indirectly drive capacitive loads. This circuit is an

improvement to the circuit shown in Figure 36 because it provides DC accuracy as well as AC stability. R1 and

C1 serve to counteract the loss of phase margin by feeding the high frequency component of the output signal

back to the amplifiers inverting input, thereby preserving phase margin in the overall feedback loop. The values

of R1 and C1 should be experimentally determined by the system designer for the desired pulse response.

Increased capacitive drive is possible by increasing the value of the capacitor in the feedback loop.

Copyright © 1999–2013, Texas Instruments Incorporated

Submit Documentation Feedback

13

Product Folder Links: LMC6462 LMC6464