GaAs SP4T Switch, Absorptive, Single Supply

DC - 4.0 GHz

Rev. V4

MASWCC0010

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.4155721

• China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

1

ADVANCED:

Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY:

Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Features

• Operates DC - 4 GHz on Single Supply

• ASIC TTL / CMOS Driver

• Leadless 4 x 7 mm Chip Scale Plastic Package

• Low DC Power Consumption

• 50 Ohm Nominal Impedance

• Test Boards are Available

• Tape and Reel is Available

• Lead-Free CSP-2 Package

• 100% Matte Tin Plating over Copper

• Halogen-Free “Green” Mold Compound

• 260°C Reflow Compatible

• RoHS* Compliant Version of SW90-0003

Description

M/A-COM's MASWCC0010 is a SP4T absorptive

pHEMT switch with integral TTL driver. This device

is in an MLP plastic surface mount package. This

switch offers excellent broadband performance and

repeatability from DC to 4 GHz, while maintaining

low DC power dissipation. The MASWCC0010 is

ideally suited for wireless infrastructure applications.

Ordering Information

Part Number

Package

MASWCC0010

Bulk Packaging

MASWCC0010TR

1000 piece reel

MASWCC0010-TB

Sample Test Board

Note: Reference Application Note M513 for reel size

information.

Pin Configuration

2, 3, 4

Pin No.

Function

Pin No.

Function

1

CP2

19

GND

2

Vee

20

3

21

GND

4

C4

22

RFC

5

C3

23

GND

6

C2

24

7

C1

25

RF3

8

26

GND

9

27

10

28

GND

11

29

RF4

12

30

GND

13

GND

31

14

RF1

32

Vee

15

GND

33

Vcc

16

34

17

GND

35

Vcc

18

RF2

36

CP1

* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.

1.

NC = No Connection

2.

For single supply operation VEE is internally generated

and must remain isolated from external power supplies.

Generated noise is typical of switching DC-DC converters.

3.

Connections and external components shown in functional

schematic are required. 0.1µF Capacitors need to be lo-

cated near pins 32 & 33.

4.

The exposed pad centered on the package bottom must be

connected to RF and DC ground. (For PQFN Packages)