www.RFM.com

E-mail: info@rfm.com

Page 1 of 3

©2008 by RF Monolithics, Inc.

SNAP910 - 4/10/08

DEVELOPER KIT

(Info: click here)

Specifications

RF Frequency

902MHz to 927MHz

Radio Certification

Certified under FCC Part 15.247, license free

Operating Range

Indoor: 1000’ outdoor: >20 miles with omni-directional antenna

Radio Network Topology

Star network

Radio Network Protocol

Dynamically assigned TDMA with ARQ

Configuration Interface

Asynchronous (RS-232) up to 115.2 Kbps

I/O Data Rate

10 Mbps Ethernet to the SNAP, 115.2Kbps to each radio

RF Data Rate

172.8Kbps

# of Frequency Channels

54

RF Bandwidth

460 KHz

Transmit Power Output

10 mW, 100 mW or 500mW, software selectable

Receiver Sensitivity

-103 dBm for 10-5 BER

Supply voltage

9vdc

Power consumption

4.5W

Size (mm)

201 x 144 x 53

Weight

727g

Case Material

Ruggedized aluminum

Operating Temperature

-300C to 700C

Humidity

20% to 90% (non-condensing)

Designed for use as a base station for WIT910-based products, the SNAP910 provides seamless Ethernet

connectivity for remote serial devices. The SNAP910 connects up to 15 WIT910 wireless remotes to a 10/

100Base-T Ethernet network. The SNAP910 also is ideal for use as access points for a network of RFM HN-

91 Series modems. Multiple SNAPs can be co-located to support larger numbers of remote devices. Certified

by the FCC, the SNAP910 can be used license-free in the US.

900MHz

High-Speed

Frequency

Hopping

Network Access

Point

SNAP910

Features:

• 900 MHz frequency hopping spread

spectrum technology

• Serial-to-Ethernet conversion

• Seamless roaming capability

• 172.8Kbps data rate throughput

• 20+ mile range with omni anntenna

• FCC certified

Benefits:

• License-free operation

• Immunity to jamming and multipath

fading

• Allows non-Ethernet devices to connect

to Ethernet network

• Supports far-ranging mobile

applications

• Shortens time to market

• Simple installation

SNAP910