AN2577 datasheet(21/34 Pages) STMICROELECTRONICS

No. de pieza	AN2577

Descripción Electrónicos	Using the eTPU angle clock

PDF	34 Pages

Scroll/Zoom	100%

Fabricante Electrónico	STMICROELECTRONICS [STMicroelectronics]

Página de inicio	http://www.st.com

Logo

21 / 34 page

AN2577

System design

21/34

Note:

Asserting HOLD will always subtract exactly one tooth from the TCR2 angle count. The

correction is made by stopping the count, and the angle count does not decrement or repeat

any count.

3.5

Tooth circuit failure

If the tooth circuit fails and the failure is detected by the host, the software may implement a

limp home strategy. The eTPU angle clock provides a method to disconnect the angle clock

system from the Channel 0 input so that spurious signals from the tooth circuit will not

disrupt the limp home system. In that event, the host may configure the eTPU such that

Channel 0 continues to monitor the tooth circuit for diagnostic purpose. See the Reference

Manual for details.

AN2577 Datasheet(PDF) 21 Page - STMicroelectronics