| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
AN2627 Datasheet(PDF) 13 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
AN2627 Datasheet(HTML) 13 Page - STMicroelectronics |
|
13 / 19 page ![]() AN2627 Demonstration board usage recommendation Doc ID 13913 Rev 2 13/19 4 Demonstration board usage recommendation The demonstration board shown in Figure 13 is provided with a Kelvin connection, so for each pin there are two lines available: one used to supply or sink current, and the other used to perform the needed measurement. The ST8R00 inhibit pin does not have an internal pull-up, so the inhibit pin cannot be left floating. Figure 13. The ST8R00 demonstration board Figure 14. Demonstration board layers The board has one inhibit pin available, located on the top left of the board. The inhibit pin can be used to supply an external voltage higher than 2 V to turn on the device, or an external voltage lower than 0.8 V to turn off the device. Top layer Bottom layer |
|
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |